Antik ATK VoIP-202 Bedienungsanleitung PDF herunterladen (Seite 48)

Užívateľská príručka / User manual – ATK VoIP-202

• Insert the RJ-45 Ethernet Cable to WAN port on the gateway, ensure

the gateway connects into the internet

• For the LAN port, you can connect it to the PC

• Connect a phone cable between the PSTN and the PSTN port on the

gateway as the lifeline.

• Use a RJ11 phone cable to connect between the phone and the

PHONE port on the gateway.

• Insert the 12V/1A power adapter

2.3 Display and status indicators

WAN: WAN port indicator LED. When lit this LED indicates that the

connection between the Gateway and WAN has been satisfied.

LAN: LAN port indicator LED. When lit this LED indicates that the

connection between the Gateway and LAN has been satisfied.

PHONE: Phone status LED. The LED lit when the handset has been picked

up or it turns off when the handset has been hanged up.

REG: Register indicator LED. A continuously lit LED indicates the resister

has been success. A flashing LED warns the resistor has been failed.

POWER: Power supply indicator LED. This LED indicates that the Power for

the gateway is available.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 71 72

Keine Kommentare

Antik ATK VoIP-202 Bedienungsanleitung Seite 48